Spektrum Replacement DX6i Roller Menu Scroll Button

Spektrum Replacement Roller Menu Scroll Button with metal hex shaft for roller sensor. For DX6i, DX7S, DX8, DX9 transmitters. 

• 0.12 mm layer
• 15-30 mm/s
• PETG
• 1.6 mm hex wrench

Insert hex wrench into button side and protrude appropriate amount to fully engage roller sensor. May need to test fit in transmitter. If tolerance of hex wrench is on the low side a bit of glue might be needed on the hex wrench (ENSURE TRANSMITTER FIT IS GOOD PRIOR). Glue hex wrench into roller button and cut off remaining button side of hex wrench with Dremel.