MONOLITH TOWER LANTERN

Modern design lantern lamp, ideal for the home or office.

HOW TO PRINT
The 3mf project was designed for a 60 cm lantern, scale it to the desired dimensions, but be careful to check the dimensions of the holes for applying the magnets.

🔒 Usage Notice 

This design is for personal, non-commercial use.

 Commercial use is not permitted, either digitally or physically.

📩 If you would like a commercial license, please contact me directly.

⚠ Remember: Unauthorized commercialization may result in PRINTABLES penalties and potential legal action.

Follow me on other social media too: https://linktr.ee/forgia3dlab

If you want a commercial license to sell physical prints, register here:https://www.patreon.com/c/Forgia3DLab

Personally I scaled the project to 50% to be able to print it with an PRUSA XL

The STL files are already resized to 50% of the original in 3mf.

PRINT PARAMETER:

PLA eSun black or other

0,2 layars

3 wall

25% infill

210 °C 

100 mm/s speed

ASSEMBLY MATERIALS:

This project does not require screws of any kind, just magnets and a classic or LED light bulb.

-6mm x 2mm neodymium magnets

-26mm lamp holder with small thread.

-6mm black three-phase electrical cable

-Screwdriver

-Lamp bulb pitch 13.8 mm

Very simple assembly, just connect the cables to the bulb holder, glue the magnets and position the various pieces according to the instructions. For the side panels there are grooves to join them together after gluing the magnets. Happy printing and have fun makers.

Follow the assembly instructions or see the video at the suggested link

Assembly instructions:

1- Print all the parts with the desired material
2- Print the internal panels in transparent PETG
3- Insert the 5x2 mm Magnets into the appropriate cavities present in the various components.
4- Glue the internal panels to the walls with the rectangular cavities on the inside
5- Insert the electric cable equipped with a power button into the base, then connect the two wires to the lamp holder.
the polarity of the wires does not matter.
6- Assemble the 4 walls by inserting the protruding part of walls 1 and 3 into the cavities of walls 2 and 4.
7- Insert the base2 into the lamp holder base and then fit the magnets of the walls onto the base (be careful to glue the magnets with opposite polarities)
8- Insert the top

This is the link to the assembly video: https://www.youtube.com/watch?v=Ff1DThZps5U