Nerf Sledgefire powerdart mod [NO HARDWARE NEEDED]

So I had an old Sledgefire lying around that was toping out at a bout 1m range for one dart and the others flew out only when the stars aligned correctly. so i designed a barrel and leaver to transform it into an very strong single shot gun. (It has a better rate of fire tho as no shells are needed). 

NO EXTERNAL HARDWARE IS REQUIRED as the air compressor is very big due to it beeing intended for 3 darts. 

INSTRUCTION: 

1. Print files, this will make it easier to understand what to do with an open blaster.
2. Open the Blaster up!

    3. Remove the highlightet parts by unscrewing the 3 screws in the round thing.

    4. Drill out the air restrictors and all the plastic that covers the air chamber.

     5. Remove all the plastic inside making the barrel fit into the tube. (i used a Dremel  and             some pliers and then sanded until the barrel fit ) Gluing is recomended. ONLÖY PUSH IN ABOUT ONE CM SO IT WOND INTERFIERE WITH THE PUSHER.

                                            (this is not enough, all the plastic on top needs to be gone.)

      6. install the leaver with the pin side- first. connecting it to the mechanism

     7. Add the upper ring on top to match the thickness of the part there before.

      8. Screw together and fire away!

       CHECK THIS OUT ! I got the inspiration from this post, he explains a little bit better than i did and also had pictures

https://www.instructables.com/Nerf-Singled-Sledgefire/

show some love!