ESP32CAM-Case goes to Articulating Raspberry Pi Camera

The ESP32CAM from Michal Fanta looks good, but it works with GoPro-Adapter.
So I made a Adapter for the Articulation Camera-System in FreeCAD.

Made with PETG: Orange Black
Layer   0.2mm
Infill  15% Geradlinig
Support: Gitternetz (*)

(*) Hints for the Support:
- Turn the "articulating_like_joint_case_clip.stl" (clip) 90°

- Add Support:

- Slice and look:

This is the last Layer from Support and

this is the 1st Layer from the Body.

- Result:

You get a better Surface on the underside. You see the difference?
Not perfect, but the Result counts.

For the first times it goes "a" little bit strong into the bag(?).

This is the placement for the parts, switch off the Parts who don't wanted.
The CAM-Bottom is without Logo.
Attention: The 3mf-File is made for Prusa MK4

- Some Hints:

On https://www.printables.com/de/model/326443-articulated-camera-mount-for-prusa-i3-mk3
I found here a very helpfull hinge-m-ball:

 Or https://www.printables.com/de/model/192881-articulated-camera-mount-remix-with-eryone-thinker

Another Hint is the "Smooth Nut" to see where the nut or the screw is.
https://www.printables.com/de/model/55521-smooth-nut-for-articulating-raspberry-pi-camera-mo

And this Bracket for the X-Axis (Prusa MK4):
https://www.printables.com/de/model/581186-prusa-mk4-x-carriage-camera-or-generic-mount

Another hint for the ESP32CAM:
I found 2 kinds of CAMs:
"OV2640" and "TY-OV2 640-V2.0"

The Picture from the 1st CAM stay and the 2nd CAM turned 90°.
I don't know why.
I'm using this Software: https://randomnerdtutorials.com/esp32-cam-video-streaming-web-server-camera-home-assistant/