It's Me, Mario!

I actually do print all of the models I upload and that takes a time and filament.

Visit my Patreon (in bio or http://patreon.com/JustBe3D) If you are interested in *exclusive* FREE and members only models or a commercial license to sell your physical prints of my models.

As I can only upload models slowly visit https://makerworld.com/en/@user_2108045257 if you're interested in my full free collection. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Overture Red Transmission Distance: 8.2

Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Space Gray
At layer #17 (1.44mm) swap to White
At layer #21 (1.76mm) swap to Black
At layer #22 (1.84mm) swap to Red
At layer #29 (2.4mm) swap to White for the rest.