BB-8

For *exclusive* FREE models (including the Darth Vader pictured below) visit my Patreon in bio or http://patreon.com/JustBe3D also if you are interested in members only models, or a commercial license to sell your physical prints of my models.

Can be rescaled just remember not to change the Z axis.

I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Overture Orange Transmission Distance: 7.4

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #17 (1.44mm) swap to White
At layer #21 (1.76mm) swap to Black
At layer #22 (1.84mm) swap to Orange for the rest.