Foldable Box - print in place

Foldable Box. Print in place. Fits Bambu Lab X1 Carbon. For printing on Prusa i3 mk3/mk4 you need to scale the box and the key down by 5%, so 95% of the original size.
Made to gift jewelry.

-Folds open when the “Stöpsel” (Key) is unscrewed (pressed down and unscrewed - clockwise for a change).

-Dimensions(Box):
80mm x 80mm x 80mm+

-Be sure to use concentrical infill pattern for the bottom layer, if you dont the box wont fold.

-"Stöpsel Naggich" is just the base “Key”. You can edit it to add/place your preferred object on top.

-view “Arschloch-Box” for example. There were magnets used to lock the middle finger to the flower. Magnets used were the standard set of Prusa-magnets: https://www.prusa3d.com/de/produkt/set-of-magnets/ 

→ Be sure to use superglue to glue the magnet into the flower while embedded-printing as the magnet will probably get stuck to the nozzle while going over it.