Emax Babyhawk 2/o3 - Decorative Horns

Made some simple horns to mount on top of the Babyhawk! These come in at 1.96 grams the way that I printed them, but could even be a little less if you tweak it some more.

Uses the same screws already installed in the camera housing, but any m2 bolts should fit - stick to m2x10.

Print Settings -

• 0.2 layer height
• 2 walls (using 1 wall brings the weight down by ~0.2 grams)
• 30% cubic infill (sounds like a lot but the space is tiny. Cutting this down to 15% only reduces weight by ~0.1 grams)
• Material: I used high speed TPU and printed in general at 70mm/s. 
• Printer: Bambu Lab P1S. If you want my exact settings for this print or my TPU profile, just let me know.

Happy flying!