• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Image 1
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Image 2
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Image 3
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Image 4
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Image 5
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Image 6
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Thumbnail 1
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Thumbnail 2
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Thumbnail 3
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Thumbnail 4
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Thumbnail 5
Astrocam Arrowhead  and other Thumbdrive Camera nose cones 3D Printer File Thumbnail 6

Astrocam Arrowhead and other Thumbdrive Camera nose cones

Jamie Claye avatarJamie Claye

August 7, 2024

printables-icon
DescriptionCommentsTags

Description

If you have a flash drive camera or the news Estes Astrocam, here are a few nose cone options for you.

You'll want a small rubber band or tape to fully secure the camera.

For the Thumb drive camera, search Ebay for Thumb or Flash drive cameras.

Note: The Micro Camroc uses the Flash Drive Camera. They're not great cameras but boy are they cheap!

The BT-5, 20, 40 and 50 will hold the new Estes Astrocam and tilt it at a better recording view angle. Nose cones have a U-tube for attaching the shock cord.

The BT-60 rings fit between the nose cone and the body tube. You should tape them to the nose cone

 

BT-55 Astrocam has a opening at the top and bottom that would allow you to thread a shroud line through it so you can suspend it looking down by the parachute.

I suggest using supports to print the overhang areas of the nose cone.  I've included the 3MF project file incase you want to use that. 

And if you have TWO Astrocams - this nose cone if for YOU! 

 

The BT-50 version of the Arrowhead 

The sides are flatten for launch rod clearance, and it gives it even more of an Arrowhead look.

The Filler piece is optional and printed separately to allow for an optional color and adds a cool look.  I probably will try flying without it to see if the Arrowhead whistles. 

 

 

Category: Hobby

License:

Creative Commons — Attribution — Noncommercial — Share Alike

Related Models

Thor Mjolnir Hammer Bic Pen preview image

Thor Mjolnir Hammer Bic Pen

effektz profile image

effektz

9,087

Diverse Schilder / various labels  for hobby & makers preview image

Diverse Schilder / various labels for hobby & makers

RPK profile image

RPK

2

Customizable EU License Plate Keychain preview image

Customizable EU License Plate Keychain

John_M profile image

John_M

36

Vorpal The Hexapod Walking Robot preview image

Vorpal The Hexapod Walking Robot

vorpal profile image

vorpal

4,983

MakerZ – Open Source 1/28 RC Drift Chassis by Fails & Makes | Açık Kaynak 1/28 RC Drift Şasisi preview image

MakerZ – Open Source 1/28 RC Drift Chassis by Fails & Makes | Açık Kaynak 1/28 RC Drift Şasisi

Fails&Makes profile image

Fails&Makes

Cacciavite Portachiavi - Scewdriver keychain preview image

Cacciavite Portachiavi - Scewdriver keychain

Butti Maker Studio profile image

Butti Maker Studio

22

Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED preview image

Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED

scottrlindsey profile image

scottrlindsey

4,448

Small Parts Storage Drawers - Organizer preview image

Small Parts Storage Drawers - Organizer

GT 3D Makers profile image

GT 3D Makers

29

8