February 15, 2026
Description
12/02/2024: Modified version added: wall width slightly increased and pyramids can be connected.
Last photo -- side by side comparison with original (used the same printer, the same filament and the same settings). Round holes of original print were deburred (mine is with no post-printing modifications).
I printed it on Elegoo Neptune 4 in PLA and PETG (on photos black -- PLA, grey -- PETG) using the following settings:
Walls: 4
Supports: No
Layer height: 0.2mm
You may use brim for better adhesion (I printed without brim).
License:
Creative Commons — Attribution — Share Alike
6
fifonik
