Feinwerkbau sight risers

Hey there!

It's time to add another air rifle brand to my collection of sight risers! This time, it's all about Feinwerkbau air rifles.

As with any of my sight risers, you will need M3 hex nuts as well as two M3x20 and one M3x16 socket screws.

For greater heights, check out this model by NightKnight: https://www.printables.com/model/491267-feinwerkbau-sight-riser-fwb/files

My Print settings:

• PLA
• 0,4mm Nozzle
• 0.2mm layer height
  • optional: for a better curvature you can make finer heights, or change the layer height in that area with slicer settings
• Orientation: “Upside-Down” with the flat part of the dovetail lying on the print bed. Th “shoulders” must be supported.

Please note that this is a work in progress. I did not test out all height variations, so if you come across any problems, please let me know and I'll be happy to fix 'em!

Happy Printing!