Babyphone Camera Holder *Update

Description

New Version that fit all Babyphone Cameras with a standard Camera Thread 1/4-20 UNC

Easy to print, no supports, all bolts printable

Newly made dad who didn't feel like spending money again for a simple holder and also didn't wanted to drill holes in the wall.

I made the first version specific for the Momcozy Setup, but didn't like that you saw a bolt in the view.

This new version don't has this problem anymore and is compatible to many more Cameras that have the 1/4-20 UNC Thread.

I modeled a Hirth Joint between the camera platform and the base with 20 clicks to adapt the angle.

* Update

I reworked all bolts and threads to have more play

Added *.step File, feel free to modify

Verify if the bolt holes don't have small filament pieces, if so, remove them with a cutting tool
Check all bolts before assemble in there holes, sometimes you need to turn them back and forth a bit (i removed between 0,1-0,15 mm on all bolt threads - needed when you 3d print bolts)
Connect base top to the base with the 6mm bolt - 5mm Allen Key needed (the 6mm is longer than the 1/4-20 UNC bolt)
Screw the 20mm bolt in the base
Connect you camera to the platform with the 1/4-20 UNC camera bolt - 5mm Allen Key needed
Now connect platform to top base with the 10mm bolt with handle
Tight all bolts Carefully, no need over tighten.

What do you need?

Parts and bolts should be printed with different settings. Bolts need to be stronger

I printed all on an Creality K1
I recommend PETG now, because its more flexible and don't change after time
Certainly you can use your own filament with your settings. The table below are my setting which give me good results for the bolts.

License:

Creative Commons — Attribution — Noncommercial