JessEm Rout R Lift Magnetic Tool Holder ( router )

This is a remix of a nice tool holder for the JessEm router lifts.  The JessEm lifs come with 2 tools - an insert ring lock/unlock tool & a crank tool to raise and lower the router lift.

I removed the ears from the original model as I didn't want screw mounts and I added 4 locations on the back of the model to hold double stacked 10x3mm magnets.  You'll need 8 10x3mm magnets and I suggest about 4 drops of CA (superglue) in the recesses to secure the magnets.  The magnet recesses are 10.1mm x 6mm deep. 

Magnets make is so easy to put this tool anywhere near your router table or table saw.  Move the tools from your bench and stick to your cast iron table while using your router.  For, I stuck it to the Harvey steel router dust collection box under my router.  Very easy and convenient access to these necessary tools.

the model in the pictures were printed in Bambu Matte PLA with a .4 mm nozzle, .24mm layer heights and 15% infill.  I added the “JESSEM” recessed logo in the slicer; it's not in the stl file.