Bumpers/ears for FT991A

Pretty much self-explanatory. Attach to the side of a Yaesu FT991 to protect the knobs and rear panel connectors and give the radio a more solid footing.

Uses four (4) 4mm x 20mm flat head screws. If you have a large enough printer, print Parts 1 & 2. If not, print Split parts 1 thru 4 and four (4) dowels. Dowels should fit snugly if your printer is tuned, but may be uniformly scaled up or down by a percent or 2 to adjust for tolerance.

No supports needed. Maximum dimension 305mm.