Drip Tray for Fridge Water Dispenser

Designed this tray to catch the stray drips from our fridge.  It is asymmetrical and oddly shaped, but if you have the same model or similar it might work for you.  

There is an rectangular indent that is supposed to catch the drips.  This tray fit in the indent, so it stay in place and just lifts out.  Nothing required to hold it in place.

It is designed to print at a 45 degree angle on the bed with support included in the model (See the *.3mf.)  The support snap off pretty easily.  It warped on all my attempts to print it flat.  Generally I have good luck printing boxes and trays in this manner to control warping.  (I also think this orientation makes the model stronger, but not really necessary for this one).  

The cylinder in the *.3mf is a support suppresser.  It does not print.