June 5, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 67.26x90mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Black Transmission Distance: 0.6
PLA BambuLab Matte Red Transmission Distance: 2
PLA BambuLab Matte Yellow Transmission Distance: 4
PLA BambuLab Matte White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Red
At layer #19 (1.6mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
JesseIrwin
