September 16, 2024
Description
This Adapter adds support for the BIQU MicroProbe v2.0 to Neptune 4 Series Printers and is also compatible with LayerShifted-Fanmod for the N4 Series Printers. May be incompatible with the fanbar!
The holes are pre-threaded in the file to recieve the 2.5mm Screws the MicroProbe ships with. It replaces the original Probe in its original location.
To provide a easier printing experience you are required to glue in the little Pin into the main Part as described in the 2nd Image.
Parts
1x M3 6mm Screw (stock screw is 8mm and will be too long)
[probe]
x_offset: -24.215
y_offset: 30.013
Current Version
v03 (fixed clearance issue with X-Axis)
Disclaimer: I dont own a Biqu Microprobe and modeled this from the Data Biqu provides. If there are any issues please let me know. Because of this this is Work-in-Progress!
-----
Feel free to buymeacoffee.com/lamarc
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
layer.shifted
