June 27, 2024
Description
I needed a compact mount to fit a Topton N100 Mini-PC with fan in a shallow structured wiring box. Total height of the Topton plus mount and fan is just under 3" which provided sufficient clearance and airflow. As in the original, the two halves are engaged by gravity, so only wall-mount configurations are recommended!
Printed in PLA+
0.4mm nozzle, 5 top & bottom layers, 5 perimeters.
I used 0.3mm base layer height and 0.1mm for the wedge.
Use 2 M3x4 and 2 M3x6 ultra low profile screws to attach case bracket to Mini-PC.
Running ethernet cables? Check out my Easy Cable Management Clips.
License:
Creative Commons — Public Domain
PatPend
