7" Inch Vinyl Record Single with Small Hole

This is based on a standard RCA 7" vinyl record blank that would have an A and B side that holds only one song one it.

These traditionally would be what you used on a vinyl/record lathe to cut the music while it plays. This is more for art or a model for a 7" record but might be a fun to bring in PVB (Similar to PVC which records are often made of) and you could something to smooth it out and try to cut it on a vinyl/record lathe.

This will fit on a record player and should as close as I could measure to a real 7" record.

The dimensions should be 7.25" long by 1.4mm thick with a 7.505mm hole. Should be a tight fit. This does have a small curve to the edges to mimic some of the pressed records.

The best way I could find to print the tops in a spiral was to make the Wall Thickness about 100 so the top and bottom could look like a record.