Flower pot holder for window sills (Customizable)

1. measure the bottom of the flower pot -> for example 117mm
2. download a protractor app on your cell phone 
   (e.g. Android: https://play.google.com/store/apps/details?id=org.nixgame.bubblelevel) or measure the angle of your windowsill in another way -> for example 5.2 degrees

The model variant 120mmx5deg.3mf is suitable for this flower pot and window sill angle
 

Print Settings

• 0.2 Layerheight
• no Brim
• no Support
• 3 Walls
• 20% Infill
• Print as shown in the picture below

Costumize with Autodesk Fusion 360 (or simular)

I use some parameters for dynamically changing the model. 

• A: Outer-Diameter - Diameter of the flowerpot at the base 
• B: Angle - Angle of the Fensterbank 
• C: Offset - Additional height 
• D: Support Area for the flowerpot 
• E: Bottom Thickness 
• F: Wall Thickness 
• G: Number of slots in the bottom. 
  Hinweis: Für ≥ = 120 mm werden 64 Schlitze empfohlen; Für ≤=110mm werden 32 Schlitze empfohlen. Dies muss in der Historie manuell angepasst werden, indem das Kreismuster unterdrückt oder die Unterdrückung aufgehoben wird.