Indesit fridge freezer drawer door catch

A replacement for those small catches on the freezer doors which break off easily.

I used some strong narrow double sided sticky tape (the foamy TESA brand with yellow protective film works well) on the back of the print to firmly attach it to the door. It wants to come out if you don't so this.

Thingiverse

https://thingiverse.com/thing:6563185

GitHub

https://github.com/nomike/indesit-fridge-freezer-drawer-door-catch-thingy

Instructions

I printed it with 4 perimeters and 50% infill in PETG. Be aware that PLA might not like the environmental conditions in your freezer, but I haven't tested this.

Category: Other