Model Description:
- A fully printable and extendable self-standing shelf that can hold more than 11 kilograms (on each plank).
- To extend, you need to print another leg and plank (the plank can be replaced by a wooden one).
- Helpful to have it in a cupboard or on the office table to create more storage space.
Print Settings:
- Legs have been printed without bottom and top layers using a cubic infill of 10%.
- Planks have been printed using gyroid infill again with 10% density.
- All parts used a layer height of 0.20mm QUALITY with a 0.4mm nozzle.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
PrintS
