August 12, 2025
Description
A 3D printable bar-end that really works, and can be re-used across multiple handlebars!
The bar-end is compatible with a range of bikes, including road bikes, mountain bikes, and gravel bikes. Its 16mm diameter insert is perfect for most handlebars, but may not fit in thicker aluminium handlebars.
The design is simple, yet effective. Put the parts together, insert into the handlebar, and tighten until it locks itself in place.
Print at 100% infill for strength, supports are required for the central hole, however it can be bridged quite easily.
1x m6 nut (10mm wide)
1x m6 bolt (25mm long)
Links for these are below:
https://www.amazon.co.uk/dp/B09FM4SW5M?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.co.uk/25mm-Allen-Socket-Head-Screws/dp/B08GY53CSS?th=1
License:
Creative Commons — Public Domain
11
Print Bike
