E 6000 Glue Adhesive Tip

Here are a couple of tips for an E6000, 3.7 oz tube of adhesive.  Fine has a 1.5mm tip, Small is 1.8mm, Medium is 2.0mm and Wide is about 4.3mm.

No supports, raft, or brims

2.0mm

PLA

15% infill

Rotate the part 90 degrees, then use the “rear seams” for best results.

For the fine tip, I use a round toothpick to plug the hole between jobs( just the tip fits in). The small and medium tips can use a scrap of filament, for the standard tip, a pencil or nail can be used, again, just the tip!

 For long-term storage, the tips should be removed.