Shelf Risers for Rise Gardens (Gen 2)

Grow large plants on the top shelf of your Gen 2 Rise Garden with these shelf risers. Add 152mm (6in) of grow height to the middle and/or top shelf of your garden giving them the same height as the taller bottom shelf. If you only have a 1-tier garden you can still use these risers if you want to give your plants some additional room to grow. 

If using for the middle shelf you will need to order two additional long drain tubes from Rise.

Compatibility:  1-3 tire Gen 2 Rise Gardens. See our Risers for the Gen 3 Rise Garden.

Our other Rise Gardens Accessories

Don't Have a 3D Printer?

We have them available with all the necessary hardware for purchase at krayft.com. 

Printing Instructions

I printed all parts from PLA, but PETG would probably work well also.

RG-Shelf_Riser & RG_Shelf_Riser_Mirror

• Print 2 of each

• Perimeters: 3

• Infill: 20%

• Layer height: 0.2mm

RG-Dowel_Nut

• Print 4

• Perimeters: 3

• Infill: 20%

• Layer height: 0.15 mm (this layer height works best for the threads)

Hardware

• 4x 3/8" x 2" Wooden dowel

• 8x 5/16"-18 thread 5/8" long countersink stainless steel screws

• 2x Long Drain Tubes (only necessary if you are using the risers for the middle shelf of a 3 tier garden)

Installation Instructions

PDF instructions can be found in the files section.