Flash Forge Adventure 5M (1x & 2x) Rocker Switch Box

Needed some way to turn off and on my LED light bar so I made this box that goes onto the front right frame rail for a 8.5mm x 13.5mm rocker switch. Uses an M4x12mm bolt and an m4 nut. 

USE V2
 

10/13/24: Updated the tolerances from .1mm to .05mm since I figured out that the A5M can print pretty tight tolerances. I have left the step files so people can edit the tolerances if necessary. 

Also added a double stack version so you can have two switches in the same spot. It should clear the cooling fan shroud. I am using my top switch as lights and plan to have filtration set to the other switch below.