Customizable containers

These are simple but useful small containers, designed to hold small things and with the rounded corners in the bottom to make it easier to pull out small things like washers and screws.

The wall thickness has been tweaked to print nicely with a 0.4mm nozzle, making a sturdy box, though that can also be changed using the customizer settings in the top of the scad file usig OpenSCAD if need be.

There is two types, one with a single compartment inside, and one with a divider in the middle giving you two equal sized rooms.

I have used these in a wooden tool caddy, where the dimensions have been adjusted to fit the room in the caddy, having a little extra space around them to make it easy to get them in and out, when using them (around 0.5mm on all sides works well).