January 15, 2025
Description
I've made this design specifically to be able to hold some of my 3D Printing tools and glues, and it turned out great!
The bottom is not super thick, but can hold about 4-5 pounds worth of tools without bending.
If you want the base to be thicker, add 2 more layers to the bottom shell in your slicer.
This was tested & printed on a FlashForge Adventurer 5M Pro (0.4 nozzle), with FlashForge PETG Pro Filament 1.75mm +/- 0.02mm Burnt Titanium.
License:
Creative Commons — Attribution — Noncommercial
9
A2G ALIZARD GAMING
