June 9, 2024
Description
Simple and thick wall bracket to secure tall items to a wall. Helps prevent tipping.
Bracket has two holes for common screws.
Triangle opening to add a thread/wire/hook.
Print using PLA MATTE/PLA+/PETG/ASA/ABS at a minimum. Regular PLA is not recommended. Screw into a stud for best performance.
Recommended 0.12-0.2mm layer heights to ensure more layers. Thick layers may reduce overall strength.
Disclaimer: Test and mount at own risk.
Dimensions:
10mm Wide
100mm Long
2mm Thick
License:
Creative Commons — Public Domain
Max
