July 11, 2024
Description
Do not use this model. See my new version that uses a fan. This one provides too much air resistance to vent effectively.
I wanted a right-angle hose adapter for QIDI Tech X-Plus3 BackPanel MOD Kit that I could use with a smaller diameter hose.
Adapter is push fit. Air leakage should be minimal.
This is the hose: https://www.amazon.com/dp/B0B6W2M295
Print this flat side down. You will need supports under and inside the small diameter adapter. PETG/ASA/ABS recommended. Print it hot for higher layer adhesion (since we're printing a circle not as hoops).
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
CVS1401
