Ceiling mount fishing rod rack

Simple 4 fishing rod holder with 2 main parts. The open part of the rack features tabs at either end for hooking a bungee cord to retain the rods. I've included screw holes with passthrough holes for a screwdriver. 

Each part is broken into 2 bodies to fit on an average print plate. I would print these with at least 4+ perimeters and top/bottom layers. I use a 0.8 nozzle, so I only did 4 and 15% infill, but you can increase that for strength. 

Recommend PETG/ABS for strength. Print flat without supports. The ends might require small rafts depending on your printer bed.