Chalmers Beer seidel Cortegen cover

Why?

Due to the high number of broken Beer seidels at the Chalmers Cortegen every year i decided to make this cover for the bottom of the glass due to most break due to dropping or get scratched from pebbles. 

The print is made for a glass with a base of 75 mm, there is a cut out in the back for the handel and a cut out in the front for that years picture.

Print:

TPU filament settings

20% infill 

Gyroid

2 walls 

takes around 6 hours to print on a MK3S 

You can print thease for 3€ at Lindholmens makerspace