Rolling Little MasterSpool (750g Filament)

Remix of DAS FILAMENT Little Masterspool ( https://www.thingiverse.com/thing:2791930 ) with some ideas taken from existing remixes.

Changes:

• Rings added
• Area for label added
• Filament slots on inner and outer rings added
• Filament coil width increased by 2.5mm - compared to the original Masterspool it was to narrow by ~2mm so my 750g refill filament wouldn't fit
• Chamfer added to bar ends so it's easier to snap the two halves together

Printed with PETG, 0.3mm, 20% Gyroid, 3 perimeters.

Please leave a comment or a photo if you print it!