Replacement Shrouded/Boxed Header Lock Arm Ejector Lever China/Taiwan 2x(xx)P IDC(xx) Ribbon Cable Connector

Replacement Shrouded Header Lock Arm Ejector Lever Chinese/Taiwan 2x(xx)P IDC(xx) Cable Connector

Searching the webs cuz you broke one? Here ya go.

Surprisingly strong - and you can always print another

Works with Elegoo Neptune 4 series extruder heads

Print with PETG or ASA

Use gluestick or spray on the bed - not a brim

Print one part at a time - slowly

0.4 mm nozzle

0.12 mm layer height

0.2 mm first layer height

outer wall first

3 walls and 2 shells

100% infill -concentric

 

1. Put a drop or two of super glue on HalfUhLever and spread it evenly with a toothpick.
2. Sandwich HalfUhLever and OtherHalfUhLever together and line them up.
3. Hold them together until the glue sets and your fingers are permanently stuck to the lever.
4. Pop the lever straight down into your cable connector and your GoodTuhGo.