T.Rex Moneybox

This money box/piggybank, when printed at the provided size, can output coins of 2.5cm diameter at the base but can devour coins of 3 to 4cm diameter. 

The coins are inserted into the mouth and can be removed by unscrewing the cap at the base or tipping the piggybank forwards for coins to come out of the mouth.

Supports are required on this model. 

Use the “tree” support style, and don't use any brims. 

Printing it larger is always recommended. Do not print it any smaller unless the coins you intend to use are small.

I recommend printing it with matte filaments as it shows the scale details better and is easier to paint on.

Whilst a solid version of the model is provided, to reduce the amount of scarring from supports, I advise using the “chopped” version.

The other two dinosaur piggybanks are available on my Cults3D and Printables stores:

https://www.printables.com/@zuperbuu_1527797/store

https://cults3d.com/en/users/zuperbuu/3d-models

To sell prints of this model, you must be subscribed to the “FREE MODELS” License on my Patreon: https://www.patreon.com/thomastedwards