Nightstand Foot Cover

This is a nightstand foot cover. It can be used to raise an entire nightstand a little, give the nightstand's feet a larger surface area, or level out the feet of the nightstand.

Print Instructions

• Material: PLA or PETG
• Supports: No
• Orientation: Place the bottom of all the pieces on the build plate

Assembly

• Place a cover on the foot of a nightstand
• Screw the cover into the foot of the nightstand (the screw hole takes a screw with a 7.5 mm head diameter and 4.5 mm shaft diameter) (optional)

If you enjoy this model, please leave a like and a comment. Please contact me if you have any questions, concerns, or problems.

If you want to support the creation of more models like this one, you can subscribe to my Printables Club (at https://www.printables.com/@Devise3D#join:451) or you can purchase an individual model on CGtraitor (at https://www.cgtrader.com/devise3d).