Golf Bag Sand Bucket Hook

Hey friends,

A quick model to help repair a friends' golf cart, which is used to carry a set of clubs and a small sand bucket to fill in divots. Over the years the original sand hook snapped off, and this was a simple repair to get a few more years of life out of the trolley :-)

The design is fairly straight forward and printed in PETG with a higher number of perimeters to add a bit more strength. I tested the hook to roughly 6kg before a small hairline crack was observed, but didn't managed to snap it, so it should be plenty strong to hold a small bucket of sand.

As part of the print I used a ‘helper disk’ to keep the part secure on the print bed and it can be trimmed off with a pair of flush cutters after printing.

Hope somebody out there finds this useful.

Cheers