VZ-Hextrudort Adaptor for the RatRig toolhead

Hi!

Here is an adaptor plate which enables mounting the VZ-Hextrudort extruder to the RatRig Toolhead aluminium top plate.

Mounting is done by countersunk M3 bolts as follows:

• add 2 x 6 mm bolts to the exterior countersunk holes;
• dissasemble the extruder until you are left with the mid piece which has the mounting holes;
• bolt the adaptor plate to the extruder using 2 x 8 mm bolts;
• bolt the adaptor+extruder assembly to the RatRig top plate;
• reassemble the extruder.

The left bolt is a bit harder to reach/turn due to the constrains, but can be tighten at the start with a ball end and after with the regular hex head.

I recommend to print it out of a stiff material or have it aluminium CNC'ed.

Have a good one!