Mammotion Luba RTK antenna wall mount with winter cap

I wasn't really happy with the alternatives and wanted a mount that would blend in well with the antenna and the wall.

My copy printed in Prusament PETG on a Mini with 0.6 nozzle, input shaper and 0.25 mm structural setting. I hope the PETG will be sufficiently resistant to outdoors exposure over time.

Check out https://printshape.se/mammotion/mammotion-luba-rtk-antenna-faeste.html if you want a professionally printed version in ASA!

Plenty of perimeters are recommended for good strength.

I didn't initially consider that the rotation of the downward facing antenna (mount) needs to be properly situated at a point ideally at the furthest point from the wall when the full antenna assembly is screwed into the wall mount, so I had to add a spacer that I then incorporated into the version uploaded here.

There are two versions:

• Wall mount 2 has 44mm tube diameter and is the one in the pictures.

• Wall mount 2b has 46mm tube diameter, giving a bit thicker material around the interior threads, which should make it stronger (though I haven't yet had any problem with the 44mm version in practice).

Update 2025-11-29

Added a winter cap which screws in from the top in place of the antenna when closing for the season. It has a lip that extends down the outside of the pipe, minimizing risk of water ingress.

Update 2025-12-06

Added an option with the cable hole going straight down instead, for those who prefer that mounting.