November 6, 2019
Description
This base is designed to hold a wireless/induction charger(See Specs bellow) and an iPhoneX (or similar) with or without an apple original rubber case in place in the latest center console of aTesla Model-X. My guess is that it should also work in aModel-S*(Let me know!)*.
It has some tolerances in the openings to make it easy to insert and remove the phone, but not too much to prevent it from moving while driving. This was made specifically to keep it from tipping when you engage it in ludicrous mode. I used to have only the charger and it always tipped when accelerating.
[Disclaimer I don't have ludicrous speed to test it with, but it should work].
Induction Charger: eBoot S9/ S9+ Fast Wireless Charging (Qii)
Amazon: http://a.co/dpAgfI9
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: No
Resolution: 0.20
Infill: 20%
Notes:
UsedPET with Carbon Fill[Techna from Emvio Eng] filament for printing. primarily for the looks of the finished print and because I believe it will prevent deforming when exposed for prolonged times to the sun. I am guessing PET, PETG will work, but will let you know how it behaves in time.(Any ideas/suggestions with this regard welcomed!)
I printed in vertical position to get maximum Z resolution and prevent supports.
Filament: Techna CarbLoaded PET – 500g
Link: https://emvioeng.com/shop/filaments/techna-carbloaded-pet-500g/
Designed in Fusion 360.
License:
Creative Commons — Attribution — Noncommercial
9
Kiko Lobo
