CR-6 SE X-Tensioner fixed

I have adapted the tensioner for the X axis of the Creality CR-6 SE that already existed and eliminated the errors.In the original there was a larger gap inside the plate. Furthermore, the thin groove on the inside was eliminated. This provides greater stability of the component. The center hole has a diameter of 3.4 millimeters. If PLA is used, the infill should be set to 100%.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

200

Infill:

Filament: Any PLA

Category: 3D Printer Parts