SCX10 III - High Clearance Bumper

High Clearance front bumper compatible with the Axial SCX10 III Basecamp. 

Please note the bumper is NOT compatible with the JLU body or other bodys that use the “clipless” mounting system.   

Provides much improved approach angle vs the stock option. 

Mounts directly to the frame rails to provide uncompromised approach angle.

sleek minimalistic design gets the job done without becoming an eye sore on your truck!

Printing Instructions:

Material: Nylon, ABS, PETG (anything with good toughness)

Layerheight: 0.15-0.30mm 

Walls: 1.2-1.8mm (3 to 4 Loops)

Infill: 20-30% (No need to go solid, part has special internal features to add strength where it is most needed) increase wall count if you have strength issues

Support: Disabled 

Orientation: As show below, Top of bumper on build plate

Assembly:

Two files are available, 

• "Heat Set" Requires 4x M3x4x5mm inserts. 
• The other the M3 screws thread directly into the print. 

Remove stock Bumper AND Bumper mount. 

Re-Use screws from stock bumper and bolt directly to the frame.