May 14, 2025
Description
Felt like my Tikka T3x CTR stock was slightly too short for optimal comfort so I designed and printed a stock extension that fits nicely with the stock and recoil pad.
Print settings
I used a 0.60mm nozzle, 5% infill and 7 walls to make it durable. Printed in Prusament Galaxy Black PETG.
Easy to print, no supports required, just make sure you use enough walls or 100% infill so it is durable.
Other notes
If using the 20 or 30mm you will need longer screws as the existing ones are too short.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
Zapador
