Hueforge - Mount St. Helens

This is a hueforge from a pic I took a few years ago of Mount St. Helens from an airplane on descent into PDX.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.52mm in size

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA+ Esun Space Blue Transmission Distance: 3.5
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #12 (1.04mm) swap to Space Blue
At layer #15 (1.28mm) swap to Beige
At layer #21 (1.76mm) swap to Jade White for the rest.