70mm Wobbler Lure

As featured in:
 

To assemble the lure you need:

1. 5x 5mm stainless steel balls
2. 3 twist wires using 0.8mm stainless steel wire
3. 5mm eye

If you have a different size wire or screw eyes and they do not fit, send me a message and I'll upload a new version (communication is faster on Discord)

In the slicer (Bambu studio or Orca slicer) rotate the model to the following angles:
 

x: 234
z: 180

Go to support painting tool, set the highlight threshold to 80-83 degrees, enable on overhangs only, and using the fill tool fill the back side of the lure only
 

Print parameters:
 

Quality:

• Seam position: back
• Wall generator: Arachne
• Order of walls: inner/outer/inner

Strength:

• Walls: 3
• Infill density: 10%
• Infill pattern: Gyroid

Speed:

• Outer wall: 60

Support:

• Enable support: Enabled
• Type: normal(manual), this is equivalent to grid support
• Base pattern spacing: 1
• Independent support layer height: disabled

These settings are for PLA, if you are using ABS or any other material, adjust the walls and infill till you get to a point where the lure body is about 6-6.5 grams

Join my discord server for discussions related to 3d printed fishing projects: https://discord.gg/qmRwEuvpnC

If you want to support my work, consider joining my club or buy anything related to 3d printing using my affiliate links:
 

International: https://www.awin1.com/awclick.php?gid=404404&mid=21809&awinaffid=1565514&linkid=2790717&clickref=printables

UK: https://www.awin1.com/awclick.php?gid=404403&mid=21809&awinaffid=1565514&linkid=2790716&clickref=printables