NEStang FPGA-Bluetooth Case - NES-Videogame

A 3d printable Case for the NEStan-core, made by nand2mario running on the tangnano20k fpga produced by SipeedIO.

NEStang Github Project

1x TangNano20k aliexpress
1x ESP32 WROOM32 USBC aliexpress
1x USB-C 2cable Socket aliexpress (NO.610D)
1x Switch LED 16mm aliexpress (3-6V,Latching Fixed)
1x Switch LED Reset 12mm (3-6V, Momentary Reset)
6x M3x8 Sockethead-Screws
6x M3x4x5 Inserts

ESP32-Firmware:
---------------------
BlueRetro_hw1_snes (Download) (BlueRetro-Projekt)
 

Pinout:
--------
Controller 1
---------------------------
TN20-Pin27   >   ESP32-GPIO5  Data clock
TN20-Pin28   >   ESP32-GPIO32 Data latch
TN20-Pin25   >   ESP32-GPIO19 Serial data

Controller 2
---------------------------
TN20-Pin26   >   ESP32-GPIO18 Data clock
TN20-Pin30   >   ESP32-GPIO22 Serial data

Power-Button(PB) & USBC
-----------------------
USBC(+)   >   PB-Pin1
PB-Pin2   >    PB(+)   >   TN20-5V
USBC(-)   >    PB(-)   >   TN20-GND

Bluetooth-Button(BTB)
----------------------------------------
BTB-Pin1   >   ESP32-IO0 (Right Pin of the ESP32-Boot-Button)
BTB-Pin2   >   BTB(-)   >    ESP32-GND
BTB(+)     >   ESP32-GPIO17