Xbox 360 Controller Wheel

The wheel can make one of the joysticks not move all of the way, so if your game supports it you might want to change the controls.

You will need a 608 bearing for the wheel. If you are going to print one I recommend the one by zimo.

Printing Settings:

You will need to print this with PETG or else it will not work. If you use PLA it will break when trying to put it on because it is weaker and less flexible than PETG. The best orientation for printing is on its side, so that the layers will not snap apart when bending it to put it on the controller. You should set supports to everywhere, since there is lots of overhangs.

     More designs