June 19, 2024
Description
This remix only pretends to build the same tool buy cheaper, the way to achieve that is to reuse the old spare parts from your MK3/4
Here is the BOM for this remix:
| Mechanical parts | QTY |
|---|---|
| M3x8 SHCS — Bolts || Source: [Link] | 30 |
| M3x20 SCHS — Bolts || Source: [Link] | 2 |
| Toothless Pulley 16T or 20T Bore 3mm || Source: [Link]) | 4 |
| M3 — Threaded Inserts — M3x5x4 (M3 x OD:5 x L:4) || Source: [Link] | 30 |
| Smooth rods 330mm (Y axis of MK3/4) | 2 |
| LMUU8 Bearings | 4 |
| M3x12 SHCS - Bolts | 4 |
| M3 Square nuts | 4 |
| Retractable device | 1 |
| Key-Bak — Super48 36" 13oz (Recommended) || Source: [Link] — or — | |
| Not a Key-Bak® (Budget savvy alternative) || Source: [Link - select 500g version] | |
| Any other cheap key-back, but you will have to take care of the retraction. |
Any other information about the tool could be find in the original model https://www.printables.com/es/model/609644-stealth-press-heat-set-insert-press
License:
GNU General Public License v3.0
8
Juanfra
