Warcrow Range Ruler Tabletop

Range ruler for the Warcrow tabletop skirmish wargame by Corvus Belli. I designed it to fit the marks in a range of 15 mm equals 1 stride, since they are not using inch or cm. Have fun playing and happy printing. 

if you want to support me and buy me a coffee → https://ko-fi.com/khain 

Hints for printing: print with support on build plate only = active/on!

Further print settings:

• 0.2 mm layer hight is just fine
• printed with PLA and 0.4 mm nozzle
• infill 15%

If you have any wishes for customization etc. let me know.

Best regards,

Khain