A6 dividers with labelled index tabs

Frontmatter

The first entry to my Zettelkasten series, I guess. I'm an academic in the humanities and my preferred medium for processing literature is pen and paper, which has led me to my variant of Luhmann's Zettelkasten system. My evolving needs for managing my notes are used as an excuse (or reason) to learn freecad, which I'm a complete newbie at. Comments and suggestions for improvements are highly welcome.

The models

I've made 8 models with offset tabs, which should make the dividers work well for registers with lots of categories (e.g. alphabetically ordered catalogues).

The dividers follow DIN A6 measurments, so they're 105x148mm (4.13×5.83'') but with an additional tab on top. The reasoning behind the hexagonal pattern is 

• To save filament and 
• I like to be able to see the note behind the divider c:

You can add text in your slicer, I've used prusaslicer for my dividers and it works well enough. Alternatively, stick a bit of tape on the tab and mark the tape with permanent marker. 

Edit 10-07-2024: Added pre-labelled models; A-Ö and #, 1000-7000. Also organised files in folders.

In the photos, my cards are sitting in this wonderful index card holder →https://www.printables.com/model/850260-karteikartenhalter-a6-index-card-holder-a6